DEKAphon Pro-Wax - 500 ml

DEKAPHON PRO-WAX is a sprayable anti-corrosion coating, suitable for the protection of cavities in motor homes and caravans, as well as other applications where rust protection on surfaces is required. The product can also be used as a wax underbody protection (UBS). DEKAPHON PRO-WAX is water repellent and has very high creep and self-manufacturing properties. After drying, a slightly adhesive wax film with a high temperature resistance up to approx. 180°C lies over the treated areas. Thus, it can also be used in the engine compartment, for example. It forms less odor than conventional cavity waxes.

Application

• Cavity protection (in chassis, doors)
• Corrosion protection of steel parts (such as folds, sheet metal overlaps, sills, frame parts)
• Protection of spot welds in the engine compartment, strut bolts and water drains
• Temporary rust protection of machine parts, Tools, garden and agricultural equipment
• For difficult to reach places where corrosion protection is required
• On places that should be protected against corrosion and are not subject to abrasion and stone chipping
• Sprayable corrosion protection and cavity sealingCavity protection (in chassis, Doors)
• Corrosion protection of steel parts (such as folds, sheet metal overlaps, sills, frame parts)
• Protection of spot welds in the engine compartment, on strut bolts and water drains
• Temporary rust protection of machine parts, tools, Garden and agricultural equipment
• For difficult to reach places where corrosion protection is required
• On places that are to be protected against corrosion and are not subject to abrasion and stone chipping

Application

Shake well before use. The surface to be treated must be clean, dry, free of rust, dust and grease. The optimum distance when spraying is about 30 cm. Spray the surface with DEKAPHON PRO-WAX until a layer of the desired thickness is obtained. If thicker coats are desired, it is recommended to allow the coats to dry in between. The product can be sprayed on without streaking or wetting and it does not drip. Turn can upside down after use and spray briefly to clean spray head. Dirty surfaces and contaminated fixtures can be easily restored to a "fresh" condition with solvent. The recommended application temperature is between 15°C and 25°C.